Mazda Kazamai Concept
Mazda Kazamai means ’swirling crosswinds’ in Japanese, and was chosen to express the powerful yet nimble character of this stylish and compact crossover. Mazda Kazamai Concept is dynamic and athletic looking on the outside and displays an evolved Mazda Nagare ‘flow’ design. Unlike previous concept cars, Mazda Kazamai’s styling represents powerful natural movements that are emotionally expressed through three-dimensional motifs stretching over the whole body, representing a fusion of design and functionality.
Mazda Kazamai is an impressive combination of packaging requirements and design aesthetics. With a width of 1,930mm and a length of 4,520mm, it is slightly larger than the current Mazda3, with room for SUV comfort and functionality on the inside. Yet, because it is only 1,500mm high, has a flat roofline and very short rear overhangs, it also has a sporty coupe look with the promise of driving fun.
The innovative body design features flared fenders that emphasise SUV-like strength and a cabin befitting a sports car. The wedge-shaped profile was designed to evoke the image of a sleek arrow cutting through a mighty wind. In particular, the body design between the front wheel arches and the roof pillars is intended to express the agility and dynamism of wind gusting along the side of the vehicle. The panel lines on the sides represent swift and elegant crosswinds, further accentuating the dynamic and stylish body design. The bonnet itself is lower in the centre than at the sides, which emphasises the car’s powerful front fenders that accommodate large, 22-inch diameter wheels with 265/45 R22 tyres.
The alloy wheel design continues the crosswinds motif with each spoke carefully twisted and larger at the perimeter than in the centre, providing a strong sense of movement. The five-point Mazda grille is integrated into the body to create a clean and light image which, together with the flared front lower sides, contributes to excellent aerodynamic characteristics. The aerodynamics are further improved by making the air intakes as small as possible. The side sill panels and rear combination light covers also help to control the wind flow and reduce drag even further.
Interior - SUV Functionality with Driving Safety
Mazda Kazamai is not only a pure expression of speed and power, it also accommodates up to four passengers with compact SUV comfort and functionality. It was designed to fulfil many driver and vehicle interfaces so as to support the driver in enjoying safe and stress-free driving, with a well considered man/machine relationship, good visibility and an easy to operate cockpit. This is one of Mazda’s important areas of the Sustainable Zoom-Zoom plan.
Lightweight and Aerodynamic
Weight reduction and superior aerodynamic performance are core technologies to improve both driving pleasure and environmental performance, especially improving fuel economy. Mazda will further focus on these crucial factors in order to achieve the goals of the Sustainable Zoom-Zoom plan. Despite its powerful exterior look, the Mazda Kazamai Concept’s excellent aerodynamic performance is achieved through a flat floor panel, a rear diffuser, and a low roof line. The aim was to make the Mazda Kazamai’s aerodynamics more than 10% better than other vehicles in its class.
When Mazda set about reducing the bodyweight, they leveraged CAE applications and focused on four major areas: collision safety, handling, NVH, and strength. At the same time, lightweight materials and new processing/joining technologies were put to effective use. Aluminium or aluminium-alloy is used for the bonnet, chassis and engine block. The designers aimed to make Mazda Kazamai 100 kilograms lighter than similar models by employing plastics for the panels, fenders and the engine cover. These features also contribute to advanced handling and improved fuel economy and CO2 emissions.
Next-Generation Powertrain - 30 Percent Improvement in Fuel Consumption
The ideal powertrain match for the Mazda Kazamai Concept would be the next-generation 2.0-litre direct-injection petrol engine, which Mazda engineers are currently developing. This engine delivers a balance of sporty driving - especially in a compact car like the Mazda Kazamai - with good environmental performance. Mazda Kazamai will feature a DISI engine based on the current Mazda CX-7’s engine, with advanced technologies to minimise energy loss and vastly improved thermal efficiency. Mazda’s next generation 2.0-litre DISI petrol engine also has combustion control technology and variable valve control that deliver strong torque throughout the rev-range for excellent engine response as well as superior fuel economy. A next-generation catalyst also ensures superior emissions performance.
This engine is coupled to a lightweight, next-generation compact six-speed automatic transmission that is highly responsive and delivers the direct feel of a manual transmission, and with four-wheel drive for superior traction. In combination with Mazda Kazamai’s next-generation aerodynamics and its lightweight body outlined above, this powertrain would deliver an estimated 30 percent improvement in fuel consumption and emissions (versus the current MZR 2.0-litre petrol) - without compromising driving pleasure.
Advanced Safety and Security Features
Mazda Kazamai is not only lightweight, fuel-efficient and fun-to-drive, it is also designed with safety as a key element. Its advanced body shell is a product of a new body structure programme currently being refined at Mazda with a lightweight structure that provides high levels of crash safety. Mazda Kazamai also has a long list of active safety features including roll stability control, blind-spot monitoring to assist lane change, a pre-crash safety system and advanced dynamic stability control (DSC). And to meet future pedestrian safety requirements, it has soft plastic fenders and a shock-cone aluminium bonnet that is very efficient in absorbing impact energy.
Also onboard the Mazda Kazamai is a personal security system. This advanced system monitors the area around and inside the car, and has an automatic alert system which informs the driver in the event of an emergency to help to protect both the owner and occupants.
Technical Specifications
Dimensions
Overall length: 4,520 mm
Overall width: 1,930 mm
Overall height: 1,500 mm
Wheelbase: 2,780 mm
Seating capacity: 4 people
Engine: Next-generation 2.0L DISI petrol
Transmission: Next-generation 6-speed AT
Suspension
Front: MacPherson Strut
Rear: Multi-link
Tyres: 265/45 R22 Bridgestone
